When To Wear A Face Shield
Face shields are a necessity in lots of professions and for a wide range of tasks within the workplace or at home. OSHA requires the use of face shields when workers are uncovered to flying objects, molten metal, liquid chemicals, acids or caustic liquids, chemical gasses or vapors, or doubtlessly hazardous light radiation. Particular jobs requiring using face shields embody metal workers, some medical staff, industrial painters and employees in chemical plants. While not all employment and tasks require a face shield, they are often neglected and should be used more often.
5 Reasons To Use A Face Shield
Flying particles: Mud and different fine materials can fly into your eyes. When using chainsaws, angle grinders or related energy tools, you must always use a face shield.
Splash hazards: When handling acids, corrosives, chemical adherents or strippers and or with body fluids you should wear face shields. Typical safety eyewear doesn’t provide the required liquid splash protection required for these type of hazards.
Excessive heat: When performing furnace maintenance, engaging in welding or dealing with any molten substance it is best to use a face shield. Some face shields, typically employed in foundries, have particular coatings to provide further protection from extreme temperatures.
Arc Hazards: Electricians working with high voltage connections want protection from potential arc explosions, which can lead to severe burns and demise! Only specially designed face shields must be used. The Elvex ARC-Shield is an instance of a face shield specifically designed to protect against arc flash.
High-velocity impact hazards: Safety glasses do an excellent job of protecting your eyes. However, they can't protect your face. Plus, safety glasses might fail if hit by an object with sufficient mass or velocity. Face shields provide an extra degree of protection from high-mass and high-velocity impact hazards. With that being said, it’s always beneficial to wear safety eyewear underneath your face shield.
Fortunately, safety glasses stopped this damaged angle-grinder disk because a face shield should have been worn.
5 Face Shield Options To Consider
Side protection on face shields provides elevated protection from lateral hazards. It’s a natural intuition to turn your face away from an object flying towards you. However, this may expose your eyes or face to the incoming hazard. Make sure your face shield has adequate side protection, particularly if you happen to’re working around liquid splash or radiation hazards.
Goggle kinds such because the Jackson MonoShield with Goggles or Bolle Atom Shield provide another option for face protection when working in clean rooms, metal processing, foundries, mining, construction and more. These face shields combine a removable goggle with a face shield. This function provides the ability to exchange the goggle if it turns into scratched or damaged. Plus, chances are you'll find these face shields simpler to use in lab environments, because the face shield fits closer to your face.
Headgear – Face shields are typically worn with headgear or mounted to a traditional hard hat. Consider the type of atmosphere you’ll be working in and select the appropriate headgear system. Most face shield manufacturers provide adapters for mounting their products on hard hats.
Face shields are available in removable or lift-front designs. Removable face shields permit for straightforward replacement while lift-front kinds could be lowered and raised quickly as the task requires.
Face shield materials is available in polycarbonate, Lexan or wire mesh models. Polycarbonate and Lexan protect in opposition to impacts and are available in clear or tinted versions. Wire mesh face shields are in style with loggers and provide protection from impacts, plus they don’t fog up. However, wire mesh face shields shouldn't be used for work involving chemical, liquid splash, or fine dust hazards.
Think Safety Glasses AND Face Shield
Face shields do a wonderful job of providing additional eye and face protection from a wide range of dangers. Nevertheless, it is best to always wear safety glasses under your face shield because the underside and sides of face shields typically have gaps. Liquid or debris passing by means of these gaps can contact your eyes, potentially inflicting an injury.
Be sure to take the time to judge the risks in your work area and select the appropriate eye and face protection.
5 Reasons To Use A Face Shield
Flying particles: Mud and different fine materials can fly into your eyes. When using chainsaws, angle grinders or related energy tools, you must always use a face shield.
Splash hazards: When handling acids, corrosives, chemical adherents or strippers and or with body fluids you should wear face shields. Typical safety eyewear doesn’t provide the required liquid splash protection required for these type of hazards.
Excessive heat: When performing furnace maintenance, engaging in welding or dealing with any molten substance it is best to use a face shield. Some face shields, typically employed in foundries, have particular coatings to provide further protection from extreme temperatures.
Arc Hazards: Electricians working with high voltage connections want protection from potential arc explosions, which can lead to severe burns and demise! Only specially designed face shields must be used. The Elvex ARC-Shield is an instance of a face shield specifically designed to protect against arc flash.
High-velocity impact hazards: Safety glasses do an excellent job of protecting your eyes. However, they can't protect your face. Plus, safety glasses might fail if hit by an object with sufficient mass or velocity. Face shields provide an extra degree of protection from high-mass and high-velocity impact hazards. With that being said, it’s always beneficial to wear safety eyewear underneath your face shield.
Fortunately, safety glasses stopped this damaged angle-grinder disk because a face shield should have been worn.
5 Face Shield Options To Consider
Side protection on face shields provides elevated protection from lateral hazards. It’s a natural intuition to turn your face away from an object flying towards you. However, this may expose your eyes or face to the incoming hazard. Make sure your face shield has adequate side protection, particularly if you happen to’re working around liquid splash or radiation hazards.
Goggle kinds such because the Jackson MonoShield with Goggles or Bolle Atom Shield provide another option for face protection when working in clean rooms, metal processing, foundries, mining, construction and more. These face shields combine a removable goggle with a face shield. This function provides the ability to exchange the goggle if it turns into scratched or damaged. Plus, chances are you'll find these face shields simpler to use in lab environments, because the face shield fits closer to your face.
Headgear – Face shields are typically worn with headgear or mounted to a traditional hard hat. Consider the type of atmosphere you’ll be working in and select the appropriate headgear system. Most face shield manufacturers provide adapters for mounting their products on hard hats.
Face shields are available in removable or lift-front designs. Removable face shields permit for straightforward replacement while lift-front kinds could be lowered and raised quickly as the task requires.
Face shield materials is available in polycarbonate, Lexan or wire mesh models. Polycarbonate and Lexan protect in opposition to impacts and are available in clear or tinted versions. Wire mesh face shields are in style with loggers and provide protection from impacts, plus they don’t fog up. However, wire mesh face shields shouldn't be used for work involving chemical, liquid splash, or fine dust hazards.
Think Safety Glasses AND Face Shield
Face shields do a wonderful job of providing additional eye and face protection from a wide range of dangers. Nevertheless, it is best to always wear safety glasses under your face shield because the underside and sides of face shields typically have gaps. Liquid or debris passing by means of these gaps can contact your eyes, potentially inflicting an injury.
Be sure to take the time to judge the risks in your work area and select the appropriate eye and face protection.